Motor Focus Kit Zero (For SCTs)A must have for successful astrophotography sessionsFocus accurately and fast yourCelestron SCT telescopeusing our powerfulMotor Focus Kit Zero. Thisfast and zero backlashstepper motor has the required torque to focus your SC
Flash Sale Ongoing
Focus accurately and fast yourCelestron SCT telescopeusing our powerfulMotor Focus Kit Zero. Thisfast and zero backlashstepper motor has the required torque to focus your SCT telescope with great precision.
Pulley and Belt design allows the motor tostay awayfrom your filter wheel (and not collide with it) when you use a focal reducer. Its sophisticated SCT bracket design (margarita style) can fit all new Celestron SCTs (Classic / Edge) and RASA series.
Motor Focus Kit SCT has been replaced by the Motor Focus Kit Zero.
Zero allows backlash free movement and is way faster than older motor
Please note that you will also need a motor controller to drive this motor.
Products that can drive the Motor Focus Kit Zero are:
Dual Motor Focus Controller
Ultimate Powerboxv2only(v1 is not compatible)
eXternal Motor Controller
The embedded bipolar stepper motor provides a zero-backlash drive. The motor is very fast and allows you toquickly movefrom any focus point to another.
A special shaped black anodized aluminum bracket, hard to bend, can be attached to most of the Celestron SCT telescopes.
We have successfully installed it on:
Please notice that we provide three different SCT versions.
The difference is in the metal pulley bore diameter & the screw length in the package.
Please make sure you have selected the correct type for your telescope.
Please note that some older SCT series are not compatible with the SCT bracket so contact us with a photo of your telescope focuser if you are not certain that your telescope can accept the SCT bracket.
SCT Bracket was designed to support Celestron SCT Telescopes. Although, we have seen that it perfectly fits on Meade SCT telescopes that have the round focus knob. Please check the image if your Meade Telescope is the same as the photo’s.
For more information please contact us.
| 1 xMotor Focus Kit Zero |
|---|
| 1 xBlack Aluminum Anodized Margarita Bracket for Celestron SCT Telescopes |
| 1 xTiming Belt |
| 1 x13 mm bore size of Pulley GT2 (6″,8″,9.25″) or 22mm bore size of Pulley GT2 (11″ ,14″ Celestron) |
| 4 xM3x6mm length screws (to attach the enclosure on the bracket) |
| 3 x metric screws and 3 x plastic washers |
Motor Focus Kit SCT Installation
| Type | Value |
|---|---|
| Motor Specs | Bipolar Stepper Motor Zero Backlash Sep Angle: 1.8 deg Hold Torque: 0.8Kg/cm Detent Torque: 0.18Kg/cm |
| Dimensions (enclosure only) |
52 mm x 58 mm x 35 mm |
| Weight (including bracket) | 280g |
| Operating Temperature | -40 C to +80 C |
Reviews
There are no reviews yet.